ProductsCurrent location: Home > Products > POTTING ENCAPSULATION
  • LED T8 Cooler Light
  • Damival® 13682 AW40 / 13481 BB00
Damival® 13682 AW40 / 13481 BB00
Potting, casting resin for electronic assemblies, sensors, fragile components protection. Self-levelling potting adhesive

for batteries.

Inquiry
Damival® 13682 AW40 / 13481 BB00
▪ Polyurethane potting resin
▪ Not CMR classified, MDI free hardener,
▪ Flexible resin, even at low temperature, Shore Hardness A 46
▪ Self-extinguishing, UL94 V0 approved (file E108253)
▪ Approved for railway application: EN45545-2 HL3 for R22-23-24
▪ Thermal resistant up to 150°C
▪ High thermal conductivity: 0.95 W/m.K

▪ Coloured hardener for an easy check of the mix quality


Description
Two parts polyurethane resin free of MDI and not CMR classified. Very flexible and thermal resistant up to 150°C.
Compliant with RoHS, ELV 2000/53/CE regulations, free of any SVHC substances according to REACH , and halogen
free according to IEC 61249-2-21 and IPC 4101B.
Excellent compatibility with solder pastes (Bono test, corrosion factor < 8%) and good resistance to sulfur based gases

(H2S and SO2). Low smoke emissions and toxicity in case of fire as per EN45545-2 standard.


Application
Potting, casting resin for electronic assemblies, sensors, fragile components protection. Self-levelling potting adhesive

for batteries.


Processing
The resin must be stirred prior use, as it contains fillers which may settle during storage. Avoid air introduction during
stirring.
Polyurethane resin and hardener are sensitive to moisture during the processing steps (storage, mixing, casting). The
parts to be casted should be dry and clean.
A preheating of the parts and/or of the resin may improve the encapsulation. A vacuum processing enhances the
dielectric and mechanical properties.
Mixing can be done by machine or manually. Easy check of the quality mix thanks to the colored hardener.
The gel time and the curing time depend on the mixed volume, the temperature and the thickness of the layer. Final

properties are depending on the curing level.


Mixing ratio (resin/hardener):
Weight: 100 / 9
Volume: 100 / 13

*

*

*

*

*

Code

    

Related Products
Pre:Damival® 13682 AN90 / 13481 BB00
Next:Damival® 15182 OA00 / 15174 OB01
Home     Partner     Products     Jobs     Contact Us
Feedback

Tan Zhimin (Mr.)     Mob:+86-13543307056     E-mail:jimmy@ec-tek.com     Tel: +86-755-82760400 ext.605     Fax: +86-755-82566020

Yao Chuanshu (Mr.)       Mob:+86-18948322800     E-mail:zeman@ec-tek.com     Tel: +86-755-82760400 ext.604     Fax: +86-755-82566020

E&C Technologies(Shenzhen) Co., Ltd.

Add:#12D,Building B,Zhongzhi Times Spuare, Donghuan 2nd Road, LongHua District,ShenZhen City, China