Small MotorsCurrent location ：Home > Small Motors
- Time：2024-3-22 17:44:50 Posted：E&C Technologies(Shenzhen) Co., Ltd.
All kinds of small intelligent electrical appliances have came into various areas of life with the high-tech development, the core component of them are small motors, they will directly affect the efficiency and life of machines .To keep these machines running like new, they depend on a proven electrical insulation system. The system provides protection from temperature changes, chemicals and moisture.
Product Summary
ELANTAS Zhuhai has various products meet the requirements of small motor customers.The unsaturated polyester resins have excellent penetration, good bond strength and excellent electrical properties. Water emulsion are environmental friendly resins with excellent bond strength and suitable for use in hermetic application. Air dry resins can fast cure with excellent electrical properties.
Solutions For
- Moisture Resistance
- High Adhesion
- Low Dielectric Dissipation
- High Heat-resistance
- Fast Cure
- High Temperature stress
- Fix Coils
- Environmentally Friendly
Product Characteristics at a Glance
Product Base Resin Unique Characteristics Viscosity @25°C,mPa·s Cure Schedule Application Method Thermal Class 009-0008 ALKYD VARNISH Single-component, fast air drying, anti-tracking, fungicidal varnish. Available different color version. 100-125s @B4 21°C 45-60 MINUTES @20°C
15-20 MINUTES @80°CDIP 180 °C STERLING 77X-010 ALKYD VARNISH A clear, fast air drying or low temperature cure insulating varnish for impregnating and seal coating. Available in clear or black versions. 40-100 20-30 MINUTES @25°C DIP 180/200°C GRC59-33KB EPOXY EMULSION Single-component, no co-solvent, fast cure, environmentally friendly product, excellent resistance to chemicals and water. 10.5-12.5s @TU4 1-3 HOURS @120-130°C DIP/ROLL 180 °C PED1000-70 WATER SOLUBLE POLYESTER Single-component, economic efficiency, environmentally friendly product for general purpose use. Available in various non-volatile content versions for application. 1600-2500 2-12 HOURS @110-150°C DIP/TRICKLE/ROLL DIP 180/220°C PED1000-70FC WATER SOLUBLE POLYESTER Single component, economic efficiency, environmentally friendly product with low temperature and fast curing. Available in various non-volatile content versions for application. 18000-30000 1-3 HOURS @110-130°C DIP/TRICKLE/ROLL DIP 180℃ PED 2500 WATER SOLUBLE POLYESTER Single component, environmentally friendly product for general purpose use with no co-solvent for zero Volatile Organic Content (VOC). Also available in other nonvolatile content versions. 30-900 2-4 HOURS @120-150°C TRICKLE/ROLL DIP 180/200°C GRC59-36EB EPOXY EMULSION Single-component, low temperature and fast cure, environmentally friendly product, excellent resistance to chemicals and water. 15-40s, Tu4# 1-3 HOURS @110-130°C DIP/TRICKLE/ROLL DIP 180℃ GRC59-30MT EPOXY EMULSION Single component, solventless, strong bond strength and good chemical resistance 10-20s, Tu4# 2-3HOURS @140-150°C DIP/TRICKLE 180℃ DOBECKAN FT 2001/500 K.A & K.B UNSATURATED POLYESTERIMIDE Two-component system with excellent high temperature bond strength. The cured material displays very high resistance to tropical influences, solvents, oil, and other chemicals. 469-519 40 MINUTES @130°C
15 MINUTES @150°CDIP 180/200°C 075-0015 UNSATURATED POLYESTER Two-component system with excellent high temperature bond strength with long catalysed stability. Available in low viscosity ref LVT075-0015. 500-800 50-60 MINUTES @140-150°C TRICKLE/DIP 180℃ 075-3798 UNSATURATED POLYESTER Two-component system especially suited where high resiliency and high bond strength at elevated temperatures are required. 200-400 30–50 MINUTES @130-140°C TRICKLE/ROLL DIP 180℃ 075-3286 UNSATURATED POLYESTER Two-component system ,low viscosity and well penetration. 400-500 50-60 MINUTES @130-150°C TRICKLE 180℃ Ranvar R2003S UNSATURATED POLYESTER It exhibits good tank stability coupled with good bond strength, low shrinkage and chemical / moisture resistance. Available in low viscosity version and flammable retardant version. 350-650 1-2 HOURS
@120-130°CTRICKLE/ROLLDIP/VPI 180℃ PED 600 HI BOND POLYESTER UNSATURATED POLYESTER Low viscosity, fast curing and excellent heat resistance. 235 - 305 1 HOUR @160-170°C DIP / TRICKLE / ROLL DIP 180℃ PE 820 HB UNSATURATED POLYESTER Two-component system with high bond strength. It has excellent adhesion, adhesive hard and flexibility, good abrasion resistance, low shrinkage, good chemical corrosive resistance. 70-90s @Tu4 1 HOUR @130-150°C TRICKLE/ROLL DIP 180℃ DOBECKAN FT2001 LE UNSATURATED POLYESTERIMIDE Two-component system, low emission and high bond strength at elevated temperature, high flexibility. 500-1000 30-60 MINUTES@130-150°C TRICKLE/ROLL DIP/DIP 180℃ 5183 SW UNSATURATED POLYESTER Two-component system in low viscosity，fast curing and long pot life. 80-150 30-60 MINUTES @120°C DIP/TRICKLE 180℃ GRC 20 EPOXY REISN Excellent heat resistance and mechanical properties，good adhesion and high bond strength. 1000-2000 30-60 MINUTES @130-150°C TRICKLE/ROLL DIP/DIP 180℃ 075-4715 UNSATURATED POLYESTER GEL COAT Two-component system with highly filled polyester and well crack-resistant. 10000-30000 20-30 MINUTES @140-150°C TRICKLE/BRUSH 200℃ 075-2715 UNSATURATED POLYESTER GEL COAT Two-component system with highly filled hard polyester. It dose not crack in deep section as a result of mechanical or thermal stress loads and has excellent electrical properties； lower viscosity version LV075-2715 is available. 5500-7500 20-30 MINUTES @140-150°C TRICKLE/BRUSH 180℃ 075-2715 M UNSATURATED POLYESTER GEL COAT Improve on traditional 075-2715 which work in hard environment.The features of this system is more hard and flexible. It does not crack in deep section as a result of hard mechanical or thermal stress loads. Excellent electrical properties. 10000–12000 30-60 MINUTES @140-150°C TRICKLE /BRUSH 180℃ GRC 20 GC EPOXY GEL COAT Two-component, resilient, highly filled hard polyester with excellent abrasion resistance and excellent electrical properties. - 5-8 MINUTES @120°C TRICKLE/BRUSH 180℃ E 300-GC EPOXY GEL COAT Excellent heat resistance and mechanical properties, good adhesion and high bond strength. 290000-390000 1 HOUR @140°C TRICKLE
Small Motors
Related Products
